+86 537 3621026 | kldyl@kldyl.com.cn
Fiberglass Splint KSF420
You are here: Home » Products » Orthopedic Splint » Fiberglass Splint » Fiberglass Splint KSF420
Contact Us
ADDRESS
Anju Economic Development Zone,Jining City,Shandong 
Province,China.

PHONE
+86 537 3621 026 
+86 183 5370 6307

EMAIL
kanglida@hotmail.com 
kldyl@kldyl.com.cn
Share to:

Fiberglass Splint KSF420

Klida orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially non woven fabrics. It is characterized by better viscosity, fast drying time, high rigidness after dying and light weight. Due to better bio compatibility, po

Quantity:

Klida orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially non woven fabrics. It is characterized by better viscosity, fast drying time, high rigidness after dying and light weight. Due to better bio compatibility, polyurethane is widely used in medical places. Animal study and acute and chronic toxicity test have proved that medical polyurethane was non-toxic and no-induced distortion, no local irritation and no allergic reaction.

 

Feature

1.High Strength,Light Weight: The consumption of orthopedic splint will be 1/3 of plaster cast at the same fixed position.

2.Porous and good permeability:The holes on the product make good air-permeability and prevent skin from infection itch and smell.

3.Fast hardening:Hardening process of orthopedic casting splint is very fast and it only takes 3to 5min to start hardening and can bear weight after 20min in contrast with 24hours hardening for plaster cast.

4.Excellent X-ray radiolucency: The doctors can examine the broken parts clearly without removing the casting and splint,which ensure the accuracy and integrity of the operation.

5.Good waterproof:Don’t worry to be soaked in water for the second time and it is acceptable to take a bath and do hydrotherapy when wore with the orthopedic casting tape.

6.Convenient and flexible to be operated,good plasticity.

7.Wide range of application:External fixing of orthopedics,correction utilities of orthopedic surgery accessibility tools for artificial limb,support tools,local protective support of burn surgery etc.

 

How to Use

1. Select suitable specification according to different places.

2. Unpack it and take orthopedic splint out.Dip into normal temperature water for 5-6seconds and squeeze 2-3times.

3. Squeeze the extra water out or remove it by using dry tower.

4. Cover the orthopedic splint into the needed place and wind it with bandages.

5. Shape it as required.


Specification

NO.

Specification

Carton Size

(cm)

Packing

Operating part

KSF312

 7.5cm x 30cm/pc

65*49*44CM

20bags/box, 6boxes/ctn

Upper limb

KSF335

 7.5cm x 90cm/pc

65*49*44CM

10bags/box, 6boxes/ctn

Lower limb

KSF415

  10.0cm x 40cm/pc

65*49*44CM

 15bags/box, 6boxes/ctn

Upper limb,Lower limb

KSF430

 10.0cm x 75cm/pc

65*49*44CM

 10bags/box, 6boxes/ctn

Upper limb,Lower limb

KSF530

  12.5cm x 75cm/pc

84*50*46CM

10bags/box, 6boxes/ctn

Upper limb,Lower limb

KSF545

   12.5cm x 115cm/pc

84*50*46CM

 5bags/box, 6boxes/ctn

Lower limb

KSF630

    15cm x 75cm/pc

84*50*46CM

10bags/box, 6boxes/ctn

Lower limb

KSF645

 15cm x 115cm/pc

84*50*46CM

 5bags/box, 6boxes/ctn

Lower limb


Attentions

Operator must wear rubber glove in order to prevent polyurethane sticking together with the skin.Use it immediately once it is unpacked and it is not allowed to unpack several ones at the same time.When it is going to torn down,electric plaster saw should be used.Pay attention to the package and make sure it is sealed well during the transportation so as to prevent hardness on the way.If any quality issues found,please contact with producers or agencies just in time.