+86 537 2559509 | kldyl@kldyl.com.cn
Fiberglass Casting Tape KCF02
You are here: Home » Products » Orthopedic Casting Tape » Fiberglass Casting Tape » Fiberglass Casting Tape KCF02

Product Category

Contact Us
ADDRESS
Anju Economic Development Zone,Jining City,Shandong 
Province,China.

PHONE
+86 537 3621 026 
+86 183 5370 6307

EMAIL
kanglida@hotmail.com 
kldyl@kldyl.com.cn

loading

Share to:
sharethis sharing button

Fiberglass Casting Tape KCF02

Feature 1.High Strength,Light Weight: The consumption of orthopedic casting tape will be 1/3 of plaster cast at the same fixed position. 2.Porous and good permeability:The holes on the product make good air-permeability and prevent skin from infectio
Availability:
Quantity:

Feature

1.High Strength,Light Weight: The consumption of orthopedic casting tape will be 1/3 of plaster cast at the same fixed position.

2.Porous and good permeability:The holes on the product make good air-permeability and prevent skin from infection itch and smell.

3.Fast hardening:Hardening process of orthopedic casting tape is very fast and it only takes 3to 5min to start hardening and can bear weight after 20min in contrast with 24hours hardening for plaster cast.

4.Excellent X-ray radiolucency: The doctors can examine the broken parts clearly without removing the casting and splint,which ensure the accuracy and integrity of the operation.

5.Good waterproof:Don’t worry to be soaked in water for the second time and it is acceptable to take a bath and do hydrotherapy when wore with the orthopedic casting tape.

6.Convenient and flexible to be operated,good plasticity.

7.Wide range of application:External fixing of orthopedics,correction utilities of orthopedic surgery accessibility tools for artificial limb,support tools,local protective support of burn surgery etc.


How to Use

1. Wear the gloves and choose the proper specifications as required.

2. Use cotton tallow packing or cotton-padded packing on the fixed place at the backing.

3.Unpack it and take orthopedic casting tape out,put the cast into water for 2-3seconds and squeeze it for 2-3times,make sure the extra water is squeezed out.. 

4. Wind it into spiral with moderate tightness as required,2-6layers on supporting place and 2-4layers on non-supporting places.

5. Shape it as required and 3-5min for hardening.It can reach the functional rigid after 20min.

6. Demolish it by using electric plaster saw.


NO.

Carton  Size

Packing

KCF02 (2inch)

69x38.5x40

White,Green,Red and Yellow


7.5x360cm/roll

10bags/box, 12boxes/ctn

KCF04 (4inch)

69x38.5x40

White,Green,Red and Yellow

12.5x360cm/roll

10bags/box, 9boxes/ctn

KCF06 (6inch)

63x38.5x40

White,Green,Red and Yellow


Attentions

Operator must wear rubber glove in order to prevent polyurethane sticking together with the skin.Use it immediately once it is unpacked and it is not allowed to unpack several ones at the same time.When it is going to torn down,electric plaster saw should be used.Pay attention to the package and make sure it is sealed well during the transportation so as to prevent hardness on the way.If any quality issues found,please contact with producers or agencies just in time.


Previous: 
Next: